Hello,
I can run this command successfully on my ansible server -
git clone git@github.com:path/repo.git
However, this command fails (see verbose ssh output below). ‘local’ is a host inventory group consisting of ‘localhost’.
ansible local -a “git clone git@github.com:patch/repo.git” -vvvv
This is a new ansible install on a new server, so I’m stumped. The same SSH keys and setup work on my older ansible server. Any assistn
Verbose output:
ESTABLISH CONNECTION FOR USER: klemoine
REMOTE_MODULE command git clone git@github.com:path/repo.git
EXEC [‘ssh’, ‘-C’, ‘-tt’, ‘-vvv’, ‘-o’, ‘ControlMaster=auto’, ‘-o’, ‘ControlPersist=60s’, ‘-o’, ‘ControlPath=/home/klemoine/.ansible/cp/ansible-ssh-%h-%p-%r’, ‘-o’, ‘StrictHostKeyChecking=no’, ‘-o’, ‘Port=22’, ‘-o’, ‘KbdInteractiveAuthentication=no’, ‘-o’, ‘PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey’, ‘-o’, ‘PasswordAuthentication=no’, ‘-o’, ‘ConnectTimeout=10’, ‘localhost’, “/bin/sh -c ‘mkdir -p $HOME/.ansible/tmp/ansible-tmp-1404319017.45-175813341407778 && chmod a+rx $HOME/.ansible/tmp/ansible-tmp-1404319017.45-175813341407778 && echo $HOME/.ansible/tmp/ansible-tmp-1404319017.45-175813341407778’”]
localhost | FAILED => SSH encountered an unknown error. The output was:
OpenSSH_5.9p1 Debian-5ubuntu1.4, OpenSSL 1.0.1 14 Mar 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: auto-mux: Trying existing master
debug1: Control socket “/home/klemoine/.ansible/cp/ansible-ssh-localhost-22-klemoine” does not exist
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 22.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug3: timeout: 10000 ms remain after connect
debug3: Incorrect RSA1 identifier
debug3: Could not load “/home/klemoine/.ssh/id_rsa” as a RSA1 public key
debug1: identity file /home/klemoine/.ssh/id_rsa type -1
debug1: identity file /home/klemoine/.ssh/id_rsa-cert type -1
debug1: identity file /home/klemoine/.ssh/id_dsa type -1
debug1: identity file /home/klemoine/.ssh/id_dsa-cert type -1
debug1: identity file /home/klemoine/.ssh/id_ecdsa type -1
debug1: identity file /home/klemoine/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6
debug1: match: OpenSSH_6.6 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1.4
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host “localhost” from file “/home/klemoine/.ssh/known_hosts”
debug3: load_hostkeys: found key type ECDSA in file /home/klemoine/.ssh/known_hosts:60
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-rsa-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: zlib@openssh.com,zlib,none
debug2: kex_parse_kexinit: zlib@openssh.com,zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 zlib@openssh.com
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 zlib@openssh.com
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA ca:9c:7a:11:09:18:01:07:e3:20:68:21:0a:03:8b:71
debug3: load_hostkeys: loading entries for host “localhost” from file “/home/klemoine/.ssh/known_hosts”
debug3: load_hostkeys: found key type ECDSA in file /home/klemoine/.ssh/known_hosts:60
debug3: load_hostkeys: loaded 1 keys
debug1: Host ‘localhost’ is known and matches the ECDSA host key.
debug1: Found key in /home/klemoine/.ssh/known_hosts:60
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/klemoine/.ssh/id_rsa ((nil)) << I wonder why it says nil
debug2: key: /home/klemoine/.ssh/id_dsa ((nil))
debug2: key: /home/klemoine/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-with-mic,gssapi-keyex,hostbased,publickey
debug3: authmethod_lookup publickey
debug3: remaining preferred: ,gssapi-keyex,hostbased,publickey
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/klemoine/.ssh/id_rsa << This should work, correct key here, proof is that it does work when I run it manually
debug1: read PEM private key done: type RSA
debug3: sign_and_send_pubkey: RSA a6:13:11:6f:4e:2c:03:a0:87:5a:52:65:50:97:f8:f2 << confirmed this key in github, again, works manually
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password << seems good here
debug1: Trying private key: /home/klemoine/.ssh/id_dsa
debug3: no such identity: /home/klemoine/.ssh/id_dsa
debug1: Trying private key: /home/klemoine/.ssh/id_ecdsa
debug3: no such identity: /home/klemoine/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey,password). << whaa ?
