nxos failure on 9k when removing vlan (nxos_vlan absent)

Archives Ansible Developer
1

Hi all,

I’m running into problems with nxos_vlan vlan removal on cisco nexus 9K. Works ok on 5k. For the 9k, ansible seems to try VXLAN commands when not configured for VXLAN.

“10.6.0.81”: {
“_ansible_no_log”: false,
“_ansible_parsed”: true,
“action”: “nxos_vlan”,
“changed”: false,
“failed”: true,
“invocation”: {
“module_args”: {
“admin_state”: “up”,
“aggregate”: null,
“associated_interfaces”: null,
“auth_pass”: null,
“authorize”: null,
“delay”: 10,
“host”: null,
“interfaces”: null,
“mapped_vni”: null,
“mode”: null,
“name”: “DEPTTEST-SF-TEST-dmz2”,
“password”: null,
“port”: null,
“provider”: null,
“purge”: false,
“ssh_keyfile”: null,
“state”: “absent”,
“timeout”: null,
“transport”: null,
“use_ssl”: null,
“username”: null,
“validate_certs”: null,
“vlan_id”: 53,
“vlan_range”: null,
“vlan_state”: “active”
}
},
“msg”: "no vn-segment\r\r\n ^\r\n% Invalid command at ‘^’ marker.\r\n\rEDC-SF-LAB-9504-81(config-vlan)# "

Here’s a 5k result:

“10.6.0.78”: {
“_ansible_no_log”: false,
“_ansible_parsed”: true,
“action”: “nxos_vlan”,
“changed”: true,
“commands”: [
“no vlan 53”
],
“invocation”: {
“module_args”: {
“admin_state”: “up”,
“aggregate”: null,
“associated_interfaces”: null,
“auth_pass”: null,
“authorize”: null,
“delay”: 10,
“host”: null,
“interfaces”: null,
“mapped_vni”: null,
“mode”: null,
“name”: “DEPTTEST-SF-TEST-dmz2”,
“password”: null,
“port”: null,
“provider”: null,
“purge”: false,
“ssh_keyfile”: null,
“state”: “absent”,
“timeout”: null,
“transport”: null,
“use_ssl”: null,
“username”: null,
“validate_certs”: null,
“vlan_id”: 53,
“vlan_range”: null,
“vlan_state”: “active”
}
}
},

Does this seem like a bug ?

Regards,

Rick

2

Yes, it would appear so. Could you open an issue at https://github.com/ansible/ansible/issues