# yum interpreter line missing

**URL:** <https://forum.ansible.com/t/yum-interpreter-line-missing/31075>\
**Category:** Ansible Project\
**Created:** [August 19, 2019, 8:44pm UTC](https://forum.ansible.com/t/yum-interpreter-line-missing/31075 "2019-08-19T20:44:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mike\_Eggleston](https://avatars.discourse-cdn.com/v4/letter/m/58956e/32.png) [@Mike\_Eggleston](https://forum.ansible.com/u/Mike_Eggleston)\
**Post date:** [August 19, 2019, 8:44pm UTC](https://forum.ansible.com/t/yum-interpreter-line-missing/31075/1 "2019-08-19T20:44:35Z")

</div>

Jonathan made me understand how my previous “can’t connect to a server” was wrong in my head.  
Now my next issue. I’m writing a little playbooks that will eventually go into a “provisioning” playbook to make all my boxes the same.  
This next block says the interpreter line is missing from the yum module.  
Here’s my playbook:

# $Id$

# $Log$

# install and configure standard packages

# :!ansible-playbook -u root -k --limit dvlnx115 --syntax-check %

# :!ansible-playbook -u root -k --limit dvlnx115 %

# :!ansible-playbook -vvv -u root -k --limit dvlnx115 %