# win\_firewall\_rule.ps1 to support multiple values for remoteip and icmp protocol

**URL:** <https://forum.ansible.com/t/win-firewall-rule-ps1-to-support-multiple-values-for-remoteip-and-icmp-protocol/23735>\
**Category:** Ansible Project\
**Created:** [February 15, 2017, 3:57am UTC](https://forum.ansible.com/t/win-firewall-rule-ps1-to-support-multiple-values-for-remoteip-and-icmp-protocol/23735 "2017-02-15T03:57:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mario\_S1](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@Mario\_S1](https://forum.ansible.com/u/Mario_S1)\
**Post date:** [February 15, 2017, 3:57am UTC](https://forum.ansible.com/t/win-firewall-rule-ps1-to-support-multiple-values-for-remoteip-and-icmp-protocol/23735/1 "2017-02-15T03:57:28Z")

</div>

New to Ansible here…  
I can’t seem to make multiple values work for the remoteip variable.  
For instance, I want to allow multiple IP subnets to work through a firewall rule.  
And also noticed the ICMPv4 protocol isn’t supported properly.  
Please advise, thanks.

---

<div class="post-metadata">

**Author:** ![Dag\_Wieers](https://avatars.discourse-cdn.com/v4/letter/d/45deac/32.png) [@Dag\_Wieers](https://forum.ansible.com/u/Dag_Wieers)\
**Post date:** [February 15, 2017, 12:49pm UTC](https://forum.ansible.com/t/win-firewall-rule-ps1-to-support-multiple-values-for-remoteip-and-icmp-protocol/23735/2 "2017-02-15T12:49:14Z")

</div>

We accept contributions to make these modules better.

For instance, the win\_firewall\_rule module is not idempotent and lacks check-mode support. We are working hard to improve the Windows support and additional help to make these modules better is very much appreciate.