# vyos\_config and VTI

**URL:** <https://forum.ansible.com/t/vyos-config-and-vti/25076>\
**Category:** Ansible Project\
**Created:** [July 25, 2017, 6:54am UTC](https://forum.ansible.com/t/vyos-config-and-vti/25076 "2017-07-25T06:54:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Karl\_Latiss](https://avatars.discourse-cdn.com/v4/letter/k/977dab/32.png) [@Karl\_Latiss](https://forum.ansible.com/u/Karl_Latiss)\
**Post date:** [July 25, 2017, 6:54am UTC](https://forum.ansible.com/t/vyos-config-and-vti/25076/1 "2017-07-25T06:54:25Z")

</div>

Ansible version “ansible-2.3.1.0-1.el7.noarch”  
VyOS 1.1.7

When using vyos\_config to add VTI configuration it hangs indefinitely when the VTI has not yet been associated with any VPN.

When adding the VTI interface directly (via the command line) I see the following warning after commit:

Warning: Interface vti1 is not referenced in vpn configuration.

Given this is a warning we should be able to proceed.

If I manually configure the VTI I can proceed with VPN configuration (via vyos\_config) as expected.

Is there any workaround or is this a bug?

Karl.