# use ansible configuration h3c and huawei s series switch from china

**URL:** <https://forum.ansible.com/t/use-ansible-configuration-h3c-and-huawei-s-series-switch-from-china/25111>\
**Category:** Ansible Project\
**Created:** [July 28, 2017, 2:07am UTC](https://forum.ansible.com/t/use-ansible-configuration-h3c-and-huawei-s-series-switch-from-china/25111 "2017-07-28T02:07:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lei\_wang](https://avatars.discourse-cdn.com/v4/letter/l/ee59a6/32.png) [@lei\_wang](https://forum.ansible.com/u/lei_wang)\
**Post date:** [July 28, 2017, 2:07am UTC](https://forum.ansible.com/t/use-ansible-configuration-h3c-and-huawei-s-series-switch-from-china/25111/1 "2017-07-28T02:07:51Z")

</div>

dear all:  
i want to use ansible configuration h3c and huawei s series switch but there is no network modules  
i try Developing Modules but it not work well someone help me .

---

<div class="post-metadata">

**Author:** ![Pshem\_Kowalczyk](https://avatars.discourse-cdn.com/v4/letter/p/e480ec/32.png) [@Pshem\_Kowalczyk](https://forum.ansible.com/u/Pshem_Kowalczyk)\
**Post date:** [July 28, 2017, 7:20am UTC](https://forum.ansible.com/t/use-ansible-configuration-h3c-and-huawei-s-series-switch-from-china/25111/2 "2017-07-28T07:20:31Z")

</div>

Hi,

You didn’t say what type of switch you’re trying to access. There is a module for the CloudEngine (CE) switches. If you have a different one you have the following options:

1. Adapt native ansible modules for Cisco (using ssh and ‘native’ configuration)
2. Create a driver module for napalm-ansible (again using ssh and native config)

I know that in newer software versions (8.\*) NETCONF is supported - you could try netconf\_config module.

kind regards  
Pshem