# Upgrading to centos 6.6 has broken some ansible plays **URL:** \ **Category:** Ansible Project\ **Created:** [December 8, 2014, 5:19pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985 "2014-12-08T17:19:49Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![shadybee.dev](https://avatars.discourse-cdn.com/v4/letter/s/839c29/32.png) [@shadybee.dev](https://forum.ansible.com/u/shadybee.dev)\ **Post date:** [December 8, 2014, 5:19pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985/1 "2014-12-08T17:19:49Z")
Hi I am running ansible 1.8.1. It was working fine on centos 6.5 but upgrading to centos 6.6 has broken it for certain use cases. I am using jenkins to run an ansible playbook via shell. The play will start a PHP queue worker daemon on the remote servers. Since upgrading to centos 6.6, the worker starts but then terminates after a second. Through a process of elimination, I have determined that there is something with ansible that is causing this particular issue. Below is the play: ` - hosts: staging gather\_facts: no tasks: - name: Run fresque shell: ‘sudo fresque start --config /etc/fresque/fresque.ini --queue {{ queue }} --autoloader {{ bootstrap }} --environment {{ app\_env }} --interval {{ worker\_interval }} --workers {{ num\_workers }} --verbose --debug 1’ register: output - debug: var=output.stdout\_lines ` and here is the strace output: [http://pastebin.com/CfgsdCkH](http://pastebin.com/CfgsdCkH) - Line 70 looks interesting. Google hasn’t been very conducive; I can’t see anything that’d cause this problem. I have also attempted to disable selinux to no avail. ---
**Author:** ![Brian\_Coca](https://avatars.discourse-cdn.com/v4/letter/b/6de8d8/32.png) [@Brian\_Coca](https://forum.ansible.com/u/Brian_Coca)\ **Post date:** [December 8, 2014, 5:31pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985/2 "2014-12-08T17:31:58Z")
Do not use sudo inside shell, this is not supported, we recommend using ansible's sudo facility. - name: Run fresque   shell: ...   sudo: true If sudo is not set to NOPASSWORD you'll need to invoke ansible with --ask-sudo-pass ---
**Author:** ![shadybee.dev](https://avatars.discourse-cdn.com/v4/letter/s/839c29/32.png) [@shadybee.dev](https://forum.ansible.com/u/shadybee.dev)\ **Post date:** [December 8, 2014, 5:52pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985/3 "2014-12-08T17:52:48Z")
Thanks brian. I did what you suggested and I am getting “Missing sudo password” even though that particular command is set as NOPASSWD in /etc/sudoers.d/ for the particular user. Running the command manually via cli does not request a password. Thats why I used sudo directly in the shell module but that no longer works. ---
**Author:** ![Brian\_Coca](https://avatars.discourse-cdn.com/v4/letter/b/6de8d8/32.png) [@Brian\_Coca](https://forum.ansible.com/u/Brian_Coca)\ **Post date:** [December 8, 2014, 6:20pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985/4 "2014-12-08T18:20:41Z")
ah, sorry, Ansible Does Not SUPERAntiSpyware SD To Specific commands ---
**Author:** ![shadybee.dev](https://avatars.discourse-cdn.com/v4/letter/s/839c29/32.png) [@shadybee.dev](https://forum.ansible.com/u/shadybee.dev)\ **Post date:** [December 8, 2014, 6:42pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985/5 "2014-12-08T18:42:17Z")
Sorry, “SUPERAntiSpyware SD” ? What’s that supposed to mean ? ---
**Author:** ![Brian\_Coca](https://avatars.discourse-cdn.com/v4/letter/b/6de8d8/32.png) [@Brian\_Coca](https://forum.ansible.com/u/Brian_Coca)\ **Post date:** [December 8, 2014, 7:20pm UTC](https://forum.ansible.com/t/upgrading-to-centos-6-6-has-broken-some-ansible-plays/16985/6 "2014-12-08T19:20:58Z")
bad autocorrect "ah, sorry, Ansible Does Not support sudo to specific commands"