# Unsupported parameters for (lineinfile) module: notify **URL:** \ **Category:** Ansible Project\ **Created:** [September 13, 2017, 9:52pm UTC](https://forum.ansible.com/t/unsupported-parameters-for-lineinfile-module-notify/25477 "2017-09-13T21:52:51Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Vijay\_R](https://avatars.discourse-cdn.com/v4/letter/v/67e7ee/32.png) [@Vijay\_R](https://forum.ansible.com/u/Vijay_R)\ **Post date:** [September 13, 2017, 9:52pm UTC](https://forum.ansible.com/t/unsupported-parameters-for-lineinfile-module-notify/25477/1 "2017-09-13T21:52:51Z")
Whether notify doesn’t come under lineinfile module? - is that a mistake, I have committed. Is there any other way or I can use one more name, shell module under the lineinfile to start the service? **roles/conf/tasks/main.yml** ` - lineinfile: path: /etc/cdsw/config/cdsw.conf regexp: ‘^NO\_PROXY’ line: ‘NO\_PROXY=“{{host\_ip}},127.0.0.1,100.66.0.1,100.66.0.2,100.66.0.3,100.66.0.4,100.66.0.5,100.66.0.6,100.66.0.7,100.66.0.8,100.66.0.9,100.66.0.10,100.66.0.11,100.66.0.12,100.66.0.13,100.66.0.14,100.66.0.15,100.66.0.16,100.66.0.17,100.66.0.18,100.66.0.19,100.66.0.20,100.66.0.21,100.66.0.22,100.66.0.23,100.66.0.24,100.66.0.25,100.66.0.26,100.66.0.27,100.66.0.28,100.66.0.29,100.66.0.30,100.66.0.31,100.66.0.32,100.66.0.33,100.66.0.34,100.66.0.35,100.66.0.36,100.66.0.37,100.66.0.38,100.66.0.39,100.66.0.40,100.66.0.41,100.66.0.42,100.66.0.43,100.66.0.44,100.66.0.45,100.66.0.46,100.66.0.47,100.66.0.48,100.66.0.49,100.66.0.50”’ notify: CDSW initialization ` ---
**Author:** ![John\_Harmon](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@John\_Harmon](https://forum.ansible.com/u/John_Harmon)\ **Post date:** [September 13, 2017, 10:33pm UTC](https://forum.ansible.com/t/unsupported-parameters-for-lineinfile-module-notify/25477/2 "2017-09-13T22:33:10Z")
I could be wrong as I am still new to ansible, but I believe you are just indented too far. It should be at the same level as lineinfile, not a sub of it `Enter co` - lineinfile: path: /etc/cdsw/config/cdsw.conf regexp: ‘^NO\_PROXY’ line: ‘NO\_PROXY=“{{host\_ip}},127.0.0.1,100.66.0.1,100.66.0.2,100.66.0.3,100.66.0.4,100.66.0.5,100.66.0.6,100.66.0.7,100.66.0.8,100.66.0.9,100.66.0.10,100.66.0.11,100.66.0.12,100.66.0.13,100.66.0.14,100.66.0.15,100.66.0.16,100.66.0.17,100.66.0.18,100.66.0.19,100.66.0.20,100.66.0.21,100.66.0.22,100.66.0.23,100.66.0.24,100.66.0.25,100.66.0.26,100.66.0.27,100.66.0.28,100.66.0.29,100.66.0.30,100.66.0.31,100.66.0.32,100.66.0.33,100.66.0.34,100.66.0.35,100.66.0.36,100.66.0.37,100.66.0.38,100.66.0.39,100.66.0.40,100.66.0.41,100.66.0.42,100.66.0.43,100.66.0.44,100.66.0.45,100.66.0.46,100.66.0.47,100.66.0.48,100.66.0.49,100.66.0.50”’ notify: CDSW initialization `de here...` ---
**Author:** ![system](https://us1.discourse-cdn.com/ansible/original/1X/1882d9a01da5d8996a862359b0913cc568a39b84.svg) [@system](https://forum.ansible.com/u/system)\ **Post date:** [September 14, 2017, 7:16pm UTC](https://forum.ansible.com/t/unsupported-parameters-for-lineinfile-module-notify/25477/3 "2017-09-14T19:16:43Z")
John Harmon is correct, you have it as an option of lineinfile, but it is really a task keyword and should be unindented for it to work properly.