# run ssh command on Sonus SBC 5110 device ( only use raw module, no network module available for this device)

**URL:** <https://forum.ansible.com/t/run-ssh-command-on-sonus-sbc-5110-device-only-use-raw-module-no-network-module-available-for-this-device/24433>\
**Category:** Ansible Project\
**Tags:** ansible-project\
**Created:** [May 9, 2017, 5:05pm UTC](https://forum.ansible.com/t/run-ssh-command-on-sonus-sbc-5110-device-only-use-raw-module-no-network-module-available-for-this-device/24433 "2017-05-09T17:05:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kai\_Stian\_Olstad](https://avatars.discourse-cdn.com/v4/letter/k/e19adc/32.png) [@Kai\_Stian\_Olstad](https://forum.ansible.com/u/Kai_Stian_Olstad)\
**Post date:** [May 9, 2017, 5:05pm UTC](https://forum.ansible.com/t/run-ssh-command-on-sonus-sbc-5110-device-only-use-raw-module-no-network-module-available-for-this-device/24433/1 "2017-05-09T17:05:17Z")

</div>

I'm not sure how and why, but the raw module doesn't work with some devices.  
In my limited experience it looks like it fails in situation where the remote is not a shell.

It these circumstances you will need to use the expect module.