# rds module errors

**URL:** <https://forum.ansible.com/t/rds-module-errors/13646>\
**Category:** Ansible Project\
**Created:** [October 9, 2013, 7:01pm UTC](https://forum.ansible.com/t/rds-module-errors/13646 "2013-10-09T19:01:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![knowshan](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@knowshan](https://forum.ansible.com/u/knowshan)\
**Post date:** [October 9, 2013, 7:01pm UTC](https://forum.ansible.com/t/rds-module-errors/13646/1 "2013-10-09T19:01:14Z")

</div>

I am getting different results from two Ansible installations. One of the installations is on CentOS 6.4 and other one is on Mac. The issue is related to rds module as described below.

On CentOS 6.4 with Python 2.6.6, Ansible 1.3.3 and boto 2.13 are installed in a home directory using virtualenv-pip. The RDS instance is defined in a playbook as follows:

{{{

---

<div class="post-metadata">

**Author:** ![Michael\_DeHaan2](https://avatars.discourse-cdn.com/v4/letter/m/da6949/32.png) [@Michael\_DeHaan2](https://forum.ansible.com/u/Michael_DeHaan2)\
**Post date:** [October 9, 2013, 8:22pm UTC](https://forum.ansible.com/t/rds-module-errors/13646/2 "2013-10-09T20:22:27Z")

</div>

Sounds like your installation is a bit crossed up, where you might be pointed at an old library directory.

Check to see what you have in /usr/share/ansible

---

<div class="post-metadata">

**Author:** ![knowshan](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@knowshan](https://forum.ansible.com/u/knowshan)\
**Post date:** [October 9, 2013, 8:55pm UTC](https://forum.ansible.com/t/rds-module-errors/13646/3 "2013-10-09T20:55:08Z")

</div>

Yup, that’s it. Another version of Ansible is installed in the system wide path.

I can get around this issue by specifying a custom module path on command line - “-M $HOME/PythonEnvs/ansible/share/ansible”.