# raw commands to appliances with limited SSH support

**URL:** <https://forum.ansible.com/t/raw-commands-to-appliances-with-limited-ssh-support/21136>\
**Category:** Ansible Project\
**Created:** [April 12, 2016, 11:34am UTC](https://forum.ansible.com/t/raw-commands-to-appliances-with-limited-ssh-support/21136 "2016-04-12T11:34:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Craig\_Wilson](https://avatars.discourse-cdn.com/v4/letter/c/eb9ed0/32.png) [@Craig\_Wilson](https://forum.ansible.com/u/Craig_Wilson)\
**Post date:** [April 12, 2016, 11:34am UTC](https://forum.ansible.com/t/raw-commands-to-appliances-with-limited-ssh-support/21136/1 "2016-04-12T11:34:32Z")

</div>

We are trying to issue a command to a storage appliance we have, I have setup the raw module but I am getting /bin/sh does not exist errors, how can I stop ansible executing the command as /bin/sh -c 'command rather than just sending “command”, Annoyingly ansible even reports the command as successful since it successfully passed the command to the node.

my playbook:  
`