# No login page

**URL:** <https://forum.ansible.com/t/no-login-page/25960>\
**Category:** AWX Project\
**Tags:** awx\
**Created:** [November 8, 2017, 4:31pm UTC](https://forum.ansible.com/t/no-login-page/25960 "2017-11-08T16:31:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bill\_Nolf](https://avatars.discourse-cdn.com/v4/letter/b/a9adbd/32.png) [@Bill\_Nolf](https://forum.ansible.com/u/Bill_Nolf)\
**Post date:** [November 8, 2017, 4:31pm UTC](https://forum.ansible.com/t/no-login-page/25960/1 "2017-11-08T16:31:43Z")

</div>

I used awx\_task and awx\_web along with docker-compose

docker ps  
awx\_task:latest is running port 8052/tcp  
awx\_web:latest is running port 0.0.0.0:80 → 8052/tcp  
rabbitmg:3 running port 4369/tcp, 5671-5672/tcp  
mencached:alpine running ports 11211/tcp  
postgres:9.6 running 5432/tcp

I have to use elinks to access awx  
[http://localhost](http://localhost)

I don’t get a login page but I get the following:

Your session will expire in 60 seconds, would you like to continue\>  
Cancel

OK  
x  
OK  
Set how many days of data should be retained.

Please enter an interger that is not negative that is lower than 9999

.  
.  
.

working

I don’t see any errors in the logs and tops shows daphne taking all the cpu?

How can I get a login prompt and how do i allow other system besides localhost to connect.

thanks

---

<div class="post-metadata">

**Author:** ![matburt](https://sea1.discourse-cdn.com/ansible/user_avatar/forum.ansible.com/matburt/32/3612_2.png) [@matburt](https://forum.ansible.com/u/matburt)\
**Post date:** [November 9, 2017, 9:02pm UTC](https://forum.ansible.com/t/no-login-page/25960/2 "2017-11-09T21:02:39Z")

</div>

elinks as in the text based web browser? That’s probably not going to work out very well.

It looks like awx\_web is bound to [0.0.0.0:80](http://0.0.0.0:80) so you should be good to route traffic to whatever system is running the service assuming your firewall rules allow it.

Not sure why daphne is eating so much cpu. I will say that using docker-compose for the production build is not something we have available for our official installation so it’s going to be hard to help you. Maybe you could try a normal deployment and we can see what’s going on?