# NetScreen | ScreenOS Devices - Devices without Python and Shell

**URL:** <https://forum.ansible.com/t/netscreen-screenos-devices-devices-without-python-and-shell/22793>\
**Category:** Ansible Project\
**Created:** [October 14, 2016, 6:00pm UTC](https://forum.ansible.com/t/netscreen-screenos-devices-devices-without-python-and-shell/22793 "2016-10-14T18:00:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Daniel\_Neto](https://avatars.discourse-cdn.com/v4/letter/d/a6a055/32.png) [@Daniel\_Neto](https://forum.ansible.com/u/Daniel_Neto)\
**Post date:** [October 14, 2016, 6:00pm UTC](https://forum.ansible.com/t/netscreen-screenos-devices-devices-without-python-and-shell/22793/1 "2016-10-14T18:00:12Z")

</div>

Hi Friends,

I’m interested in develop or start something to help me in Configuration Management of devices without Python and Shell.

There are simple devices, running the old OS of Juniper.

Basically they only support raw commands, but even raw commands I’m not getting results in my lab tests.

I’m not found any information to these cases.

Today I have a lot of shell scripts using Expect to manage them, but It’s a true hell.

Where I start?

Regards,

References:  
[ScreenOS 6.3 IPv4 CLI Reference Guide: Command Descriptions](http://www.juniper.net/techpubs/software/screenos/screenos6.3.0/630_ipv4_cli.pdf)

[Concepts & Examples ScreenOS Reference Guide: All parts combined](http://www.juniper.net/techpubs/software/screenos/screenos6.3.0/630_ce_all.pdf)