# Module Paths for junos-eznc

**URL:** <https://forum.ansible.com/t/module-paths-for-junos-eznc/22771>\
**Category:** Ansible Project\
**Created:** [October 11, 2016, 7:16pm UTC](https://forum.ansible.com/t/module-paths-for-junos-eznc/22771 "2016-10-11T19:16:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zod](https://avatars.discourse-cdn.com/v4/letter/z/9dc877/32.png) [@Zod](https://forum.ansible.com/u/Zod)\
**Post date:** [October 11, 2016, 7:16pm UTC](https://forum.ansible.com/t/module-paths-for-junos-eznc/22771/1 "2016-10-11T19:16:21Z")

</div>

Trying to setup Ansible on Mac OS X 10.10.3  
Have ansible 2.1.1.0 python 2.7.12  
installed junos-eznc  
Testing uploading a conf file to a juniper device and getting:  
fatal: [srx]: FAILED! =\> {“changed”: false, “failed”: true, “msg”: “junos-eznc \>= 1.2.2 is required for this module”}

I did install that:  
Successfully installed MarkupSafe-0.23 PyYAML-3.12 cffi-1.8.3 cryptography-1.5.2 enum34-1.1.6 idna-2.1 ipaddress-1.0.17 jinja2-2.8 junos-eznc-2.0.1 lxml-3.6.4 ncclient-0.5.2 netaddr-0.7.18 paramiko-2.0.2 pyasn1-0.1.9 pycparser-2.14 pyserial-3.1.1 scp-0.10.2 six-1.10.0

Don’t know how to tell it where to look for these modules and don’t know where to go from here.

Here is my simple yaml file:

---

<div class="post-metadata">

**Author:** ![psprygada](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@psprygada](https://forum.ansible.com/u/psprygada)\
**Post date:** [October 13, 2016, 8:19pm UTC](https://forum.ansible.com/t/module-paths-for-junos-eznc/22771/2 "2016-10-13T20:19:45Z")

</div>

Are you attempting to run Ansible in a virtualenv?