# modprobe\_module, when setting state=present, where is it saved for adding the module at next boot ?

**URL:** <https://forum.ansible.com/t/modprobe-module-when-setting-state-present-where-is-it-saved-for-adding-the-module-at-next-boot/16716>\
**Category:** Ansible Developer\
**Created:** [November 7, 2014, 8:01am UTC](https://forum.ansible.com/t/modprobe-module-when-setting-state-present-where-is-it-saved-for-adding-the-module-at-next-boot/16716 "2014-11-07T08:01:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stefan\_Eriksson](https://avatars.discourse-cdn.com/v4/letter/s/3e96dc/32.png) [@Stefan\_Eriksson](https://forum.ansible.com/u/Stefan_Eriksson)\
**Post date:** [November 7, 2014, 8:01am UTC](https://forum.ansible.com/t/modprobe-module-when-setting-state-present-where-is-it-saved-for-adding-the-module-at-next-boot/16716/1 "2014-11-07T08:01:39Z")

</div>

Hi Its unclear where modprobe module save the settings, I cant find a list of modules to load att boot in /etc/modprobe.d/

There’s also no info about this in the module website.

for example kernel\_blacklist says:

blacklist\_file,use this blacklist file instead of /etc/modprobe.d/blacklist-ansible.conf.

and this file is created. But there’s no such info for modprobe module.

Thansk

---

<div class="post-metadata">

**Author:** ![Michael\_DeHaan1](https://avatars.discourse-cdn.com/v4/letter/m/5e9695/32.png) [@Michael\_DeHaan1](https://forum.ansible.com/u/Michael_DeHaan1)\
**Post date:** [November 7, 2014, 2:27pm UTC](https://forum.ansible.com/t/modprobe-module-when-setting-state-present-where-is-it-saved-for-adding-the-module-at-next-boot/16716/2 "2014-11-07T14:27:45Z")

</div>

Hi Stefan,

As this is a usage related question, can you ask this on ansible-project instead?

Thanks!