# Kindly advice for AnsibleAWX Performance

**URL:** <https://forum.ansible.com/t/kindly-advice-for-ansibleawx-performance/36596>\
**Category:** AWX Project\
**Tags:** kubernetes, aws, awx\
**Created:** [May 5, 2022, 4:58am UTC](https://forum.ansible.com/t/kindly-advice-for-ansibleawx-performance/36596 "2022-05-05T04:58:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![arun\_soman](https://avatars.discourse-cdn.com/v4/letter/a/dfb087/32.png) [@arun\_soman](https://forum.ansible.com/u/arun_soman)\
**Post date:** [May 5, 2022, 4:58am UTC](https://forum.ansible.com/t/kindly-advice-for-ansibleawx-performance/36596/1 "2022-05-05T04:58:00Z")

</div>

Hi All,

We install the open-source Ansible AWX using the document “[https://github.com/ansible/awx-operator](https://github.com/ansible/awx-operator) “ in AWS EKS.

And we configured some workflow jobs in the Ansible AWX, But we are getting too slow to complete the Job.

We need to increase the performance of the job, so Kindly advise is there anything to do specifically for increasing the performance.

Thanks in advance

> **(attachments)**
>
> ![awx-k8s.png](https://us1.discourse-cdn.com/ansible/original/2X/d/d389ce78151396ec7b34d08e0e9c31f4109ca4c5.png)

---

<div class="post-metadata">

**Author:** ![adpavlov](https://sea1.discourse-cdn.com/ansible/user_avatar/forum.ansible.com/adpavlov/32/10205_2.png) [@adpavlov](https://forum.ansible.com/u/adpavlov)\
**Post date:** [May 25, 2022, 2:55pm UTC](https://forum.ansible.com/t/kindly-advice-for-ansibleawx-performance/36596/2 "2022-05-25T14:55:47Z")

</div>

Experiencing same slow behavior. In my case few parallel jobs are running quite fast and fine.  
However, if I need to launch more than 10 parallel jobs it will lead to 10 Pods/containers creation, which takes more than 2 minutes to create Pods and containers.  
At the same time awx\_task container memory usage goes to the sky up to 8Gb, server is lagging.  
Sometimes jobs are going in Error state with different reasons like:

- Error creating pod: rpc error: code = Unknown desc = database is locked

- No output found for this job.

- Error opening pod stream: Get “[https://ansible:10250/containerLogs/awx/automation-job-503-9j922/worker?follow=true](https://ansible:10250/containerLogs/awx/automation-job-503-9j922/worker?follow=true)”: write tcp 10.50.78.37:6443-\>10.50.78.37:41436: i/o timeout

It’s real degradation in performance comparing to AWX 15 and docker architecture

четверг, 5 мая 2022 г. в 07:58:00 UTC+3, [arunned...@gmail.com](mailto:arunned...@gmail.com):