# ios\_modules

**URL:** <https://forum.ansible.com/t/ios-modules/24123>\
**Category:** Ansible Project\
**Created:** [April 2, 2017, 9:36pm UTC](https://forum.ansible.com/t/ios-modules/24123 "2017-04-02T21:36:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dave3](https://avatars.discourse-cdn.com/v4/letter/d/f1d935/32.png) [@Dave3](https://forum.ansible.com/u/Dave3)\
**Post date:** [April 2, 2017, 9:36pm UTC](https://forum.ansible.com/t/ios-modules/24123/1 "2017-04-02T21:36:20Z")

</div>

Hi All,

I’ve got a question regarding the supported platforms I hope someone can answer that. Does ansible support SG200 and SG300 switches? They do not really use the classic Cisco IOS hence I am not sure about it. Thanks in advance.

Regards,  
Dave

---

<div class="post-metadata">

**Author:** ![SK1](https://avatars.discourse-cdn.com/v4/letter/s/7ba0ec/32.png) [@SK1](https://forum.ansible.com/u/SK1)\
**Post date:** [December 12, 2017, 9:05am UTC](https://forum.ansible.com/t/ios-modules/24123/2 "2017-12-12T09:05:35Z")

</div>

Have you been able to identify anything around this? I am trying to get Ansible to work on SG200 series switch and unable to. Is it supported?

Thank you in advance!

---

<div class="post-metadata">

**Author:** ![SK1](https://avatars.discourse-cdn.com/v4/letter/s/7ba0ec/32.png) [@SK1](https://forum.ansible.com/u/SK1)\
**Post date:** [December 20, 2017, 6:55am UTC](https://forum.ansible.com/t/ios-modules/24123/3 "2017-12-20T06:55:23Z")

</div>

I got a response from Cisco sales representative that Ansible will not work on the Smart series switches as they come with limited functionality due to less cost.