# How to write a interface for multiple node with different ips using ansible

**URL:** <https://forum.ansible.com/t/how-to-write-a-interface-for-multiple-node-with-different-ips-using-ansible/21509>\
**Category:** Ansible Project\
**Created:** [May 20, 2016, 8:48pm UTC](https://forum.ansible.com/t/how-to-write-a-interface-for-multiple-node-with-different-ips-using-ansible/21509 "2016-05-20T20:48:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![satheesh\_prabhakaran](https://avatars.discourse-cdn.com/v4/letter/s/6bbea6/32.png) [@satheesh\_prabhakaran](https://forum.ansible.com/u/satheesh_prabhakaran)\
**Post date:** [May 20, 2016, 8:48pm UTC](https://forum.ansible.com/t/how-to-write-a-interface-for-multiple-node-with-different-ips-using-ansible/21509/1 "2016-05-20T20:48:17Z")

</div>

I am trying out creating bridges and adding ips to bridges in multiple servers which need to be interconnected for Openstack Ansible Deployment. I am stucking in configuring bridges with different ips.

---

<div class="post-metadata">

**Author:** ![Johannes\_Kastl](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@Johannes\_Kastl](https://forum.ansible.com/u/Johannes_Kastl)\
**Post date:** [May 21, 2016, 12:17pm UTC](https://forum.ansible.com/t/how-to-write-a-interface-for-multiple-node-with-different-ips-using-ansible/21509/2 "2016-05-21T12:17:44Z")

</div>

Care to elaborate why exactly you are stuck? Error messages? Plays?  
Code snippets? At which point does what go wrong? Or does not work?

Guessing what could go wrong is pretty hard with that little  
information...

Johannes