# How Do I Launch Two Different Playbooks or Tasks at the Same Time?

**URL:** <https://forum.ansible.com/t/how-do-i-launch-two-different-playbooks-or-tasks-at-the-same-time/45633>\
**Category:** Get Help\
**Tags:** playbook, linux\
**Created:** [April 4, 2026, 9:45pm UTC](https://forum.ansible.com/t/how-do-i-launch-two-different-playbooks-or-tasks-at-the-same-time/45633 "2026-04-04T21:45:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![RianKellyIT](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@RianKellyIT](https://forum.ansible.com/u/RianKellyIT)\
**Post date:** [April 4, 2026, 11:58pm UTC](https://forum.ansible.com/t/how-do-i-launch-two-different-playbooks-or-tasks-at-the-same-time/45633/2 "2026-04-04T23:58:43Z")

</div>

Since the two refreshes are completely independent, the simplest approach is to just run both ansible-playbook commands in parallel from a wrapper script:

```bash
ansible-playbook refresh_a_from_b.yml &
ansible-playbook refresh_d_from_c.yml &
wait

```

The `&` backgrounds each command and `wait` blocks until both finish. Total time becomes the length of the slower one rather than both added together.

If you want to keep everything in a single playbook, you can use `async` with `poll: 0` to fire and forget each task, then poll for completion later:

```yaml
- name: Start refresh A from B
  command: /path/to/refresh_a.sh
  async: 14400
  poll: 0
  register: refresh_a

- name: Start refresh D from C
  command: /path/to/refresh_d.sh
  async: 14400
  poll: 0
  register: refresh_d

- name: Wait for refresh A
  async_status:
    jid: "{{ refresh_a.ansible_job_id }}"
  register: result_a
  until: result_a.finished
  retries: 480
  delay: 30

- name: Wait for refresh D
  async_status:
    jid: "{{ refresh_d.ansible_job_id }}"
  register: result_d
  until: result_d.finished
  retries: 480
  delay: 30

```

Set `async` high enough to cover your longest expected run time (14400 = 4 hours). The `poll: 0` means Ansible starts the task and moves on immediately. The `async_status` tasks then wait for each job to complete.

The bash wrapper approach is generally more straightforward for independent playbooks, but the async approach is useful if you need Ansible to track the results and handle errors within the same run.

---

_[View the full topic](https://forum.ansible.com/t/how-do-i-launch-two-different-playbooks-or-tasks-at-the-same-time/45633)._