# Help with ios\_command Module

**URL:** <https://forum.ansible.com/t/help-with-ios-command-module/32756>\
**Category:** Ansible Project\
**Created:** [April 22, 2020, 1:17pm UTC](https://forum.ansible.com/t/help-with-ios-command-module/32756 "2020-04-22T13:17:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Omar\_Hegazy](https://avatars.discourse-cdn.com/v4/letter/o/c4cdca/32.png) [@Omar\_Hegazy](https://forum.ansible.com/u/Omar_Hegazy)\
**Post date:** [April 22, 2020, 1:17pm UTC](https://forum.ansible.com/t/help-with-ios-command-module/32756/1 "2020-04-22T13:17:39Z")

</div>

Hello, i have 2 switches. I wanted to run a command (show arp) and check a specific output if exist or not on both. Then, i wanted to run a command (show arp) and display the output.

The problem is that since the output i’m inspecting on first task doesn’t exist on switch1 … the next task (Display Output) is not performed for switch 1… i don’t know why this dependency. I thought that there shouldn’t be dependencies between tasks this way. How to overcome?

---

<div class="post-metadata">

**Author:** ![Srinivas\_Naram](https://avatars.discourse-cdn.com/v4/letter/s/eb9ed0/32.png) [@Srinivas\_Naram](https://forum.ansible.com/u/Srinivas_Naram)\
**Post date:** [April 22, 2020, 1:39pm UTC](https://forum.ansible.com/t/help-with-ios-command-module/32756/2 "2020-04-22T13:39:26Z")

</div>

You can use ignore\_errors=True