# EKS AWX install

**URL:** <https://forum.ansible.com/t/eks-awx-install/33083>\
**Category:** AWX Project\
**Tags:** awx, kubernetes\
**Created:** [June 3, 2020, 4:02pm UTC](https://forum.ansible.com/t/eks-awx-install/33083 "2020-06-03T16:02:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Staggerlee011](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@Staggerlee011](https://forum.ansible.com/u/Staggerlee011)\
**Post date:** [June 3, 2020, 4:02pm UTC](https://forum.ansible.com/t/eks-awx-install/33083/1 "2020-06-03T16:02:26Z")

</div>

Hi doing a eks install of the latest awx.

Does anyone else get constant install errors. normally like below, it seems to dip and out. i can run it again and it will pass this section fine then fail at another. Im not having anything else drop out like this. i can do helm installs and normal kubectl commands with no issues. this is the first ime im seeing it and its very regular with this install.

Is there something i can do to stop this. or is it just the install is rather flakey?

TASK [kubernetes : Record deployment size] \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*  
fatal: [localhost]: FAILED! =\> {“changed”: true, “cmd”: “kubectl get deployment awx -n awx -o=jsonpath=‘{.status.replicas}’\n”, “delta”: “0:00:11.263612”, “end”: “2020-06-03 16:29:25.262192”, “msg”: “non-zer  
o return code”, “rc”: 1, “start”: “2020-06-03 16:29:13.998580”, “stderr”: “Unable to connect to the server: dial tcp: lookup [4.sk1.eu-west-2.eks.amazonaws.com](http://4.sk1.eu-west-2.eks.amazonaws.com) on [fec0:0:0:ffff::  
2]:53: dial udp [fec0:0:0:ffff::2]:53: connect: invalid argument”, “stderr\_lines”: [“Unable to connect to the server: dial tcp: lookup [4.sk1.eu-west-2.eks.amazonaws.com](http://4.sk1.eu-west-2.eks.amazonaws.com) on [fec0:  
0:0:ffff::2]:53: dial udp [fec0:0:0:ffff::2]:53: connect: invalid argument”], “stdout”: “”, “stdout\_lines”: }

---

<div class="post-metadata">

**Author:** ![Graham\_Mainwaring](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Graham\_Mainwaring](https://forum.ansible.com/u/Graham_Mainwaring)\
**Post date:** [June 3, 2020, 6:54pm UTC](https://forum.ansible.com/t/eks-awx-install/33083/2 "2020-06-03T18:54:04Z")

</div>

[fec0:0:0:ffff::2]:53 is stateless DNS discovery over IPv6. This probably means you have IPv6 enabled but not working, or flakily working with some unreliability in its ability to discover DNSv6 servers.