# Did something change in 2.3 when using iosxr\_command?

**URL:** <https://forum.ansible.com/t/did-something-change-in-2-3-when-using-iosxr-command/24120>\
**Category:** Ansible Project\
**Created:** [April 1, 2017, 8:02am UTC](https://forum.ansible.com/t/did-something-change-in-2-3-when-using-iosxr-command/24120 "2017-04-01T08:02:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![john3](https://avatars.discourse-cdn.com/v4/letter/j/ed655f/32.png) [@john3](https://forum.ansible.com/u/john3)\
**Post date:** [April 1, 2017, 8:02am UTC](https://forum.ansible.com/t/did-something-change-in-2-3-when-using-iosxr-command/24120/1 "2017-04-01T08:02:41Z")

</div>

Hi All,

I have this playbook that is using iosxr\_command to do a show version, and it is working with 2.2.2.0, but fails with 2.3RC3. Do I have to add / change something? This playbook with iosxr\_command changed to sros\_command does work to an alcatel lucent router.

#### playbook

---

<div class="post-metadata">

**Author:** ![john3](https://avatars.discourse-cdn.com/v4/letter/j/ed655f/32.png) [@john3](https://forum.ansible.com/u/john3)\
**Post date:** [April 6, 2017, 6:38pm UTC](https://forum.ansible.com/t/did-something-change-in-2-3-when-using-iosxr-command/24120/2 "2017-04-06T18:38:50Z")

</div>

Just to note that this was fixed recently with [https://github.com/ansible/ansible/commit/c6e9039b233cb0216a4f62191945251f13631816](https://github.com/ansible/ansible/commit/c6e9039b233cb0216a4f62191945251f13631816)

John