# Deploying BigBlueButton using Ansible Server

**URL:** <https://forum.ansible.com/t/deploying-bigbluebutton-using-ansible-server/24111>\
**Category:** Ansible Project\
**Created:** [March 31, 2017, 5:48am UTC](https://forum.ansible.com/t/deploying-bigbluebutton-using-ansible-server/24111 "2017-03-31T05:48:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nexio.global](https://avatars.discourse-cdn.com/v4/letter/n/8797f3/32.png) [@nexio.global](https://forum.ansible.com/u/nexio.global)\
**Post date:** [March 31, 2017, 5:48am UTC](https://forum.ansible.com/t/deploying-bigbluebutton-using-ansible-server/24111/1 "2017-03-31T05:48:23Z")

</div>

Hello, I am trying to deploying BigBlueButton using Ansible Server. I made a YML script for that but I stuck in a problem, when the module of installing BigBlueButton ha been started it stuck. It didn’t show any error only stuck on this module. I found that while the installing of BigBlueButton a prompt screen will ask you for accept the license. So for this I used following module-

- name: bigbluebutton is installed  
sudo: yes  
command: apt-get --yes --force-yes install bigbluebutton

But it still stuck on that module. Any help would be appreciated

Thank you

---

<div class="post-metadata">

**Author:** ![Dick\_Visser](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Dick\_Visser](https://forum.ansible.com/u/Dick_Visser)\
**Post date:** [March 31, 2017, 8:21am UTC](https://forum.ansible.com/t/deploying-bigbluebutton-using-ansible-server/24111/2 "2017-03-31T08:21:20Z")

</div>

You are using the command module to run apt-get, which triggers a  
license prompt.  
This is caused by apt-get using the 'dialog' frontend.

Instead you should use the apt-get module  
([http://docs.ansible.com/ansible/apt\_module.html](http://docs.ansible.com/ansible/apt_module.html)).  
This way apt-get will be run in 'noninteractive' mode, which \*should\*  
skip the license question.  
But YMMV as it's up to the package creator to actually implement it that way.

Dick

---

<div class="post-metadata">

**Author:** ![Stephen\_Dame](https://avatars.discourse-cdn.com/v4/letter/s/ba9def/32.png) [@Stephen\_Dame](https://forum.ansible.com/u/Stephen_Dame)\
**Post date:** [April 3, 2017, 2:05pm UTC](https://forum.ansible.com/t/deploying-bigbluebutton-using-ansible-server/24111/3 "2017-04-03T14:05:52Z")

</div>

Libreoffice wants to install the microsoft fonts and wants acceptance.

echo ttf-mscorefonts-installer msttcorefonts/accepted-mscorefonts-eula select true | sudo debconf-set-selections

this will eliminate the interactive prompt your getting stuck on.

regards,  
Stephen  
[hostbbb.com](http://hostbbb.com)