# Connecting to AWX UI from another computer

**URL:** <https://forum.ansible.com/t/connecting-to-awx-ui-from-another-computer/35203>\
**Category:** AWX Project\
**Tags:** awx\
**Created:** [May 20, 2021, 12:20pm UTC](https://forum.ansible.com/t/connecting-to-awx-ui-from-another-computer/35203 "2021-05-20T12:20:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![John\_Watsham](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@John\_Watsham](https://forum.ansible.com/u/John_Watsham)\
**Post date:** [May 20, 2021, 12:20pm UTC](https://forum.ansible.com/t/connecting-to-awx-ui-from-another-computer/35203/1 "2021-05-20T12:20:06Z")

</div>

Hi

I am new to Ansible and AWX and hope somebody will be able to help me with connecting to AWX.

I have successfully installed AWX using AWX-Operator and Minikube by following the instructions in GitHub.  
[https://github.com/ansible/awx/blob/devel/INSTALL.md](https://github.com/ansible/awx/blob/devel/INSTALL.md)

I’ve reached the section that says “To access the AWX UI, you’ll need to grab the service url form minikube:”  
The IP address returned is 192.168.49.2

This address is not on my network so I am not able to connect to it from another computer.  
I’ve found a few posts which have the same issue, but I haven’t found a solution.

Is there a way to expose the service so that the UI will respond on the IP address and port 80 of the host running the minikube cluster?

Thanks,  
John

---

<div class="post-metadata">

**Author:** ![Gregory\_Storme](https://avatars.discourse-cdn.com/v4/letter/g/46a35a/32.png) [@Gregory\_Storme](https://forum.ansible.com/u/Gregory_Storme)\
**Post date:** [May 21, 2021, 8:59am UTC](https://forum.ansible.com/t/connecting-to-awx-ui-from-another-computer/35203/2 "2021-05-21T08:59:48Z")

</div>

You can run a reverse proxy (haproxy, nginx) that listens on the IP/port of your host, and pass traffic to the k8s network

---

<div class="post-metadata">

**Author:** ![John\_Watsham](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@John\_Watsham](https://forum.ansible.com/u/John_Watsham)\
**Post date:** [May 21, 2021, 5:23pm UTC](https://forum.ansible.com/t/connecting-to-awx-ui-from-another-computer/35203/3 "2021-05-21T17:23:00Z")

</div>

The simple solutions are always the best, why didn’t I think of that!  
Thank you ver much