# Cannot show output when using raw command in ansible

**URL:** <https://forum.ansible.com/t/cannot-show-output-when-using-raw-command-in-ansible/31173>\
**Category:** Ansible Project\
**Created:** [August 30, 2019, 5:49am UTC](https://forum.ansible.com/t/cannot-show-output-when-using-raw-command-in-ansible/31173 "2019-08-30T05:49:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mac\_Kam](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@Mac\_Kam](https://forum.ansible.com/u/Mac_Kam)\
**Post date:** [August 30, 2019, 5:49am UTC](https://forum.ansible.com/t/cannot-show-output-when-using-raw-command-in-ansible/31173/1 "2019-08-30T05:49:54Z")

</div>

HI friends,

When I use raw command in out remote router, then cannot show the output.  
my ansible version:2.7.5

yaml:

- hosts: SSR  
gather\_facts: no  
remote\_user: user

tasks:

- name: run  
raw: “show port”  
register: result  
-name: Print output  
debug:  
msg: “{{result.stdout}}”

result:

 ![unnamed.jpg](https://us1.discourse-cdn.com/ansible/original/2X/1/1ed07ca2af53d9e3922b4caeb1ed31424befa5af.jpeg)

attached the screen capture.

---

<div class="post-metadata">

**Author:** ![vbotka](https://sea1.discourse-cdn.com/ansible/user_avatar/forum.ansible.com/vbotka/32/359_2.png) [@vbotka](https://forum.ansible.com/u/vbotka)\
**Post date:** [August 30, 2019, 6:15am UTC](https://forum.ansible.com/t/cannot-show-output-when-using-raw-command-in-ansible/31173/2 "2019-08-30T06:15:41Z")

</div>

You can show the output. But the output is empty.

&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"stdout\_lines":

The command was silently ignored

&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"rc": 0  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"stderr": "Shared connection to ... closed."

Ansible can't help you. Probably the router's doc could.

Cheers,

&nbsp;&nbsp;-vlado

---

<div class="post-metadata">

**Author:** ![Mac\_Kam](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@Mac\_Kam](https://forum.ansible.com/u/Mac_Kam)\
**Post date:** [August 30, 2019, 7:40am UTC](https://forum.ansible.com/t/cannot-show-output-when-using-raw-command-in-ansible/31173/3 "2019-08-30T07:40:02Z")

</div>

Vladimir Botka於 2019年8月30日星期五 UTC+8下午2時15分52秒寫道：