# AWX Docker install on Centos 7 fails with Failed to set locale, defaulting to C.UTF-8 ,

**URL:** <https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395>\
**Category:** AWX Project\
**Tags:** awx\
**Created:** [January 5, 2021, 5:05pm UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395 "2021-01-05T17:05:44Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 5, 2021, 5:05pm UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/1 "2021-01-05T17:05:44Z")

</div>

Hi

I was looking at AWX earlier in the year but had to temporarily drop it to work on something else and am now able to pick it up again.

I have my old AWX install (9.3.0) still working ok.

I decided to do a fresh install with a newer version as there have been a number of releases since and the old installation and want a fresh install.

I’ve followed the same installation method I used for my old version and have attempted to install several newer versions: 11.2.0, 13.0.0 & 15.0.0 but run into the same error that occurs on the TASK [image\_build : Build base awx image] stage.

The error is below:

fatal: [localhost]: FAILED! =\> {“changed”: false, “msg”: “Error building awx - code: 1, message: The command ‘/bin/sh -c dnf -y update && dnf -y install epel-release ‘dnf-command(config-manager)’ && dnf module -y enable ‘postgresql:10’ && dnf config-manager --set-enabled PowerTools && dnf -y install ansible gcc gcc-c++ git-core glibc-langpack-en libcurl-devel libffi-devel libtool-ltdl-devel make nodejs nss openldap-devel patch @postgresql:10 postgresql-devel python3-devel python3-pip python3-psycopg2 python3-setuptools swig unzip xmlsec1-devel xmlsec1-openssl-devel’ returned a non-zero code: 1, logs: [‘Step 1/50 : ARG VENV\_BASE="/var/lib/awx/venv"’, ‘\n’, ‘Step 2/50 : ARG COLLECTION\_BASE="/var/lib/awx/vendor/awx\_ansible\_collections"’, ‘\n’, ‘Step 3/50 : FROM centos:8 as builder’, ‘\n’, ’ —\> 300e315adb2f\n’, ‘Step 4/50 : ARG VENV\_BASE’, ‘\n’, ’ —\> Using cache\n’, ’ —\> 169aeef5c18c\n’, ‘Step 5/50 : ARG COLLECTION\_BASE’, ‘\n’, ’ —\> Using cache\n’, ’ —\> 1b07b7442efb\n’, ‘Step 6/50 : ENV LANG en\_US.UTF-8’, ‘\n’, ’ —\> Using cache\n’, ’ —\> 0a7c29b61bef\n’, ‘Step 7/50 : ENV LANGUAGE en\_US:en’, ‘\n’, ’ —\> Using cache\n’, ’ —\> cc35e6a13504\n’, ‘Step 8/50 : ENV LC\_ALL en\_US.UTF-8’, ‘\n’, ’ —\> Using cache\n’, ’ —\> 0bc8d2ffbe2e\n’, ‘Step 9/50 : USER root’, ‘\n’, ’ —\> Using cache\n’, ’ —\> 96f4d16c43ce\n’, "Step 10/50 : RUN dnf -y update && dnf -y install epel-release ‘dnf-command(config-manager)’ && dnf module -y enable ‘postgresql:10’ && dnf config-manager --set-enabled PowerTools && dnf -y install ansible gcc gcc-c++ git-core glibc-langpack-en libcurl-devel libffi-devel libtool-ltdl-devel make nodejs nss openldap-devel patch @postgresql:10 postgresql-devel python3-devel python3-pip python3-psycopg2 python3-setuptools swig unzip xmlsec1-devel xmlsec1-openssl-devel", ‘\n’, ’ —\> Running in f64ef2decc40\n’, ‘\x1b[91m/bin/sh: warning: setlocale: LC\_ALL: cannot change locale (en\_US.UTF-8)\n\x1b[0m’, ‘CentOS Linux 8 - AppStream 13 MB/s | 6.3 MB 00:00 \n’, ‘CentOS Linux 8 - BaseOS 12 MB/s | 2.3 MB 00:00 \n’, ‘CentOS Linux 8 - Extras 28 kB/s | 8.6 kB 00:00 \n’, ‘Dependencies resolved.\n’, ‘Nothing to do.\n’, ‘Complete!\n’, ‘\x1b[91mFailed to set locale, defaulting to C.UTF-8\n\x1b[0m’, ‘Last metadata expiration check: 0:00:02 ago on Tue Jan 5 16:11:32 2021.\n’, ‘Dependencies resolved.\n’, ‘================================================================================\n Package Arch Version Repository Size\n================================================================================\nInstalling:\n dnf-plugins-core noarch 4.0.17-5.el8 baseos 66 k\n epel-release noarch 8-8.el8 extras 23 k\nInstalling dependencies:\n python3-dateutil noarch 1:2.6.1-6.el8 baseos 251 k\n python3-dnf-plugins-core noarch 4.0.17-5.el8 baseos 221 k\n python3-six noarch 1.11.0-8.el8 baseos 38 k\n\nTransaction Summary\n================================================================================\nInstall 5 Packages\n\n’, ‘Total download size: 599 k\n’, ‘Installed size: 1.4 M\n’, ‘Downloading Packages:\n’, ‘(1/5): dnf-plugins-core-4.0.17-5.el8.noarch.rpm 1.7 MB/s | 66 kB 00:00 \n’, ‘(2/5): python3-six-1.11.0-8.el8.noarch.rpm 7.2 MB/s | 38 kB 00:00 \n’, ‘(3/5): python3-dateutil-2.6.1-6.el8.noarch.rpm 5.3 MB/s | 251 kB 00:00 \n’, ‘(4/5): python3-dnf-plugins-core-4.0.17-5.el8.no 4.6 MB/s | 221 kB 00:00 \n’, ‘(5/5): epel-release-8-8.el8.noarch.rpm 656 kB/s | 23 kB 00:00 \n’, ‘--------------------------------------------------------------------------------\n’, ‘Total 808 kB/s | 599 kB 00:00 \n’, ‘\x1b[91mwarning: /var/cache/dnf/baseos-f6a80ba95cf937f2/packages/dnf-plugins-core-4.0.17-5.el8.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID 8483c65d: NOKEY\n\x1b[0m’, ‘CentOS Linux 8 - BaseOS 1.6 MB/s | 1.6 kB 00:00 \n’, ‘\x1b[91mFailed to set locale, defaulting to C.UTF-8\nImporting GPG key 0x8483C65D:\n Userid : "CentOS (CentOS Official Signing Key) [security@centos.org](mailto:security@centos.org)"\n Fingerprint: 99DB 70FA E1D7 CE22 7FB6 4882 05B5 55B3 8483 C65D\n From : /etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial\n\x1b[0m’, ‘Key imported successfully\n’, ‘Running transaction check\n’, ‘Transaction check succeeded.\nRunning transaction test\n’, ‘Transaction test succeeded.\n’, ‘Running transaction\n’, ’ Preparing : 1/1’, ’ \n Installing : python3-six-1.11.0-8.el8.noarch 1/5’, ’ \n Installing : python3-dateutil-1:2.6.1-6.el8.noarch 2/5’, ’ \n Installing : python3-dnf-plugins-core-4.0.17-5.el8.noarch 3/5’, ’ \n Installing : dnf-plugins-core-4.0.17-5.el8.noarch 4/5’, ’ \n Installing : epel-release-8-8.el8.noarch 5/5’, ’ \n Running scriptlet: epel-release-8-8.el8.noarch 5/5’, ’ \n Verifying : dnf-plugins-core-4.0.17-5.el8.noarch 1/5’, ’ \n Verifying : python3-dateutil-1:2.6.1-6.el8.noarch 2/5 \n Verifying : python3-dnf-plugins-core-4.0.17-5.el8.noarch 3/5’, ’ \n Verifying : python3-six-1.11.0-8.el8.noarch 4/5 \n Verifying : epel-release-8-8.el8.noarch 5/5’, ’ \n\nInstalled:\n dnf-plugins-core-4.0.17-5.el8.noarch \n epel-release-8-8.el8.noarch \n python3-dateutil-1:2.6.1-6.el8.noarch \n python3-dnf-plugins-core-4.0.17-5.el8.noarch \n python3-six-1.11.0-8.el8.noarch \n\n’, ‘Complete!\n’, ‘Extra Packages for Enterprise Linux Modular 8 - 676 kB/s | 527 kB 00:00 \n’, ‘Extra Packages for Enterprise Linux 8 - x86\_64 11 MB/s | 8.7 MB 00:00 \n’, ‘Dependencies resolved.\n’, ‘================================================================================\n Package Architecture Version Repository Size\n================================================================================\nEnabling module streams:\n postgresql 10 \n\nTransaction Summary\n================================================================================\n\n’, ‘Complete!\n’, ‘\x1b[91mFailed to set locale, defaulting to C.UTF-8\n\x1b[0m’, ‘\x1b[91mFailed to set locale, defaulting to C.UTF-8\nError: No matching repo to modify: PowerTools.\n\x1b[0m’, ‘Removing intermediate container f64ef2decc40\n’]”}

As already stated, I’m following the same installation method that has worked for several installs using older AWX versions and below are the dependency packages that I have installed:

## Install epel repo and then install jq

yum install -y epel-release -y && yum install -y jq

## Install docker-ce related packages and dependencies for the rest of the install process

yum -y install git gcc gcc-c++ nodejs gettext device-mapper-persistent-data lvm2 bzip2 python-pip python3-wheel sshpass

## Enable docker-ce repo, install docker engine, enable and start the service

yum-config-manager --add-repo=[https://download.docker.com/linux/centos/docker-ce.repo](https://download.docker.com/linux/centos/docker-ce.repo)

yum -y install docker-ce

systemctl enable --now docker.service

## Install AWX dependencies for python3 Docker-Compose installation

yum install -y python-docker

yum install -y python3-pip

yum install -y python3-devel

pip3 install --upgrade pip

pip3 install ansible

## Install Docker python module via pip - required for AWX installation

pip install docker-py

## Install Docker-Compose

pip3 install docker-compose

The PostgreSQL DB is local to the AWX install.

The only differences in the environments are miner and are below:

The old AWX 9.3.0 environment:

- Centos 7.7.1908

- Docker-Compose = 1.25.4, build unknown

- Pip3 = 20.0.2 from /usr/local/lib/python3.6/site-packages/pip (python 3.6)

- Python = 3.6.8 (default, Aug 7 2019, 17:28:10) [GCC 4.8.5 20150623 (Red Hat 4.8.5-39)]

- Ansible = 2.9.6

The new environment used for AWX 11.2.0, 13.0.0, 15.0.0

- Centos 7.9.2009

- Docker-Compose = 1.27.4, build unknown

- Pip3 = 20.3.3 from /usr/local/lib/python3.6/site-packages/pip (python 3.6)

- Python = Python 3.6.8 (default, Nov 16 2020, 16:55:22) [GCC 4.8.5 20150623 (Red Hat 4.8.5-44)]

- Ansible = 2.10.4

The configuration of both CentOS operating systems is the same apart from the version difference, yum if auto updating the OS version on the new server as part of the scripted deployment process.

AWX states it is supported on CentOS 7.7 and later so I would except 7.9 to be ok.

I’ve tried disabling the local CentOS firewall with no success but if it was a firewall issue, I’d expect there to be issues with the other package downloads.

Looking at the error message it seems to be a problem within the Docker environment but as it removes all the containers upon failing there are no logs for this.

I also tried installing version 9.3.0 on new host but ran into a different issue where a package download URL has changed and the 9.3.0 build still references the old one so it fails on this - hence I cannot test with the old AWX version.

[https://centos7.iuscommunity.org](https://centos7.iuscommunity.org) as referenced by the installer is now [https://ius.io/](https://ius.io/).

This issue does not occur on the newer versions of AWX I am trying to install.

I’ve spent some time searching for an answer to this issue but have been unable to find one, so any help is appreciated.

Thanks

---

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 5, 2021, 5:29pm UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/2 "2021-01-05T17:29:36Z")

</div>

Note that this happens when changing the AWX inventory file to create a local image:  
#dockerhub\_base=ansible

If I leave the inventory file as default AWX installs ok.  
If I change just this in the inventory file - comment out the line so it builds a local image - then it fails with the previous error.

---

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 5, 2021, 5:46pm UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/3 "2021-01-05T17:46:11Z")

</div>

Is this possibly to do with the issue in this thread where the repo name was changed from PowerTools to powertools?  
[https://serverfault.com/questions/997896/how-to-enable-powertools-repository-in-centos-8](https://serverfault.com/questions/997896/how-to-enable-powertools-repository-in-centos-8)

I know this is for yum and the AWX CentOS 8 container is using dnf but the error does reference the repo as PowerTools where the above thread says that this stopped working on 09/12/2020 and know only (lower case) powertools works when referencing the repo.

Unfortunately I don’t have a CentOS 8 machine at the moment to check this.

---

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 6, 2021, 8:14am UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/4 "2021-01-06T08:14:34Z")

</div>

To get a Centos 8 system I installed AWX vanilla, not a local build so it uses the default image.  
This successfully installs the AWX Centon 8 AWX containers.

I logged into the awx\_web container and re-ran the package install commands from the error message in the initial e-mail:

dnf -y update && dnf -y install epel-release ‘dnf-command(config-manager)’ && dnf module -y enable ‘postgresql:10’ && dnf config-manager --set-enabled PowerTools && dnf -y install ansible gcc gcc-c++ git-core glibc-langpack-en libcurl-devel libffi-devel libtool-ltdl-devel make nodejs nss openldap-devel patch @postgresql:10 postgresql-devel python3-devel python3-pip python3-psycopg2 python3-setuptools swig unzip xmlsec1-devel xmlsec1-openssl-devel

This successfully installed the packages with the following PowerTools warnings as referenced in the error:

Complete!  
CentOS Linux 8 - AppStream 15 MB/s | 6.3 MB 00:00  
CentOS Linux 8 - BaseOS 22 MB/s | 2.3 MB 00:00  
Package epel-release-8-10.el8.noarch is already installed.  
Package dnf-plugins-core-4.0.17-5.el8.noarch is already installed.  
Dependencies resolved.  
Nothing to do.  
Complete!  
Last metadata expiration check: 0:00:02 ago on Wed 06 Jan 2021 07:49:09 AM UTC.  
Dependencies resolved.  
Nothing to do.  
Complete!  
Error: No matching repo to modify: PowerTools.

Checking the locale of the container it is en\_US.UTF-8 so this has worked where as in the error message it looks like there was an issue with this as it states:

Failed to set locale, defaulting to C.UTF-8

So maybe setting the language is the issue and not PowerTools?

So running the package installation commands in the container looks to have worked where as via the AWX install script it hasn’t?

I’m really not sure why this isn’t working.

For info below is the output of the the packages upgraded and installed in the container by the package install command run:

Upgraded:  
ansible-2.9.16-1.el8.noarch apr-1.6.3-11.el8.x86\_64 bash-4.4.19-12.el8.x86\_64  
bind-export-libs-32:9.11.20-5.el8.x86\_64 binutils-2.30-79.el8.x86\_64 ca-certificates-2020.2.41-80.0.el8\_2.noarch  
centos-gpg-keys-1:8-2.el8.noarch chkconfig-1.13-2.el8.x86\_64 coreutils-single-8.30-8.el8.x86\_64  
crypto-policies-20200713-1.git51d1222.el8.noarch cryptsetup-libs-2.3.3-2.el8.x86\_64 curl-7.61.1-14.el8.x86\_64  
cyrus-sasl-lib-2.1.27-5.el8.x86\_64 dbus-1:1.12.8-11.el8.x86\_64 dbus-common-1:1.12.8-11.el8.noarch  
dbus-daemon-1:1.12.8-11.el8.x86\_64 dbus-libs-1:1.12.8-11.el8.x86\_64 dbus-tools-1:1.12.8-11.el8.x86\_64  
device-mapper-8:1.02.171-5.el8.x86\_64 device-mapper-libs-8:1.02.171-5.el8.x86\_64 dhcp-client-12:4.3.6-41.el8.x86\_64  
dhcp-common-12:4.3.6-41.el8.noarch dhcp-libs-12:4.3.6-41.el8.x86\_64 dnf-4.2.23-4.el8.noarch  
dnf-data-4.2.23-4.el8.noarch dnf-plugins-core-4.0.17-5.el8.noarch dracut-049-95.git20200804.el8.x86\_64  
dracut-network-049-95.git20200804.el8.x86\_64 dracut-squash-049-95.git20200804.el8.x86\_64 elfutils-default-yama-scope-0.180-1.el8.noarch  
elfutils-libelf-0.180-1.el8.x86\_64 elfutils-libs-0.180-1.el8.x86\_64 epel-release-8-10.el8.noarch  
expat-2.2.5-4.el8.x86\_64 file-libs-5.33-16.el8.x86\_64 filesystem-3.8-3.el8.x86\_64  
freetype-2.9.1-4.el8\_3.1.x86\_64 gd-2.2.5-7.el8.x86\_64 git-core-2.27.0-1.el8.x86\_64  
glibc-2.28-127.el8.x86\_64 glibc-common-2.28-127.el8.x86\_64 glibc-langpack-en-2.28-127.el8.x86\_64  
glibc-minimal-langpack-2.28-127.el8.x86\_64 gnupg2-2.2.20-2.el8.x86\_64 gnutls-3.6.14-6.el8.x86\_64  
gpgme-1.13.1-3.el8.x86\_64 iproute-5.3.0-5.el8.x86\_64 iptables-libs-1.8.4-15.el8.x86\_64  
kexec-tools-2.0.20-34.el8.x86\_64 krb5-libs-1.18.2-5.el8.x86\_64 krb5-workstation-1.18.2-5.el8.x86\_64  
libXau-1.0.9-3.el8.x86\_64 libarchive-3.3.2-9.el8.x86\_64 libblkid-2.32.1-24.el8.x86\_64  
libcap-2.26-4.el8.x86\_64 libcom\_err-1.45.6-1.el8.x86\_64 libcurl-minimal-7.61.1-14.el8.x86\_64  
libdb-5.3.28-39.el8.x86\_64 libdb-utils-5.3.28-39.el8.x86\_64 libdnf-0.48.0-5.el8.x86\_64  
libfdisk-2.32.1-24.el8.x86\_64 libffi-3.1-22.el8.x86\_64 libgcc-8.3.1-5.1.el8.x86\_64  
libgcrypt-1.8.5-4.el8.x86\_64 libkadm5-1.18.2-5.el8.x86\_64 libkcapi-1.2.0-2.el8.x86\_64  
libkcapi-hmaccalc-1.2.0-2.el8.x86\_64 libmodulemd1-1.8.16-0.2.9.4.2.x86\_64 libmount-2.32.1-24.el8.x86\_64  
libpcap-14:1.9.1-4.el8.x86\_64 libpq-12.4-1.el8\_2.x86\_64 librepo-1.12.0-2.el8.x86\_64  
libreport-filesystem-2.9.5-15.el8.x86\_64 libseccomp-2.4.3-1.el8.x86\_64 libselinux-2.9-4.el8\_3.x86\_64  
libsemanage-2.9-3.el8.x86\_64 libserf-1.3.9-8.module\_el8.3.0+553+567d7cb2.x86\_64 libsmartcols-2.32.1-24.el8.x86\_64  
libsolv-0.7.11-1.el8.x86\_64 libss-1.45.6-1.el8.x86\_64 libstdc+±8.3.1-5.1.el8.x86\_64  
libtiff-4.0.9-18.el8.x86\_64 libusbx-1.0.23-4.el8.x86\_64 libuuid-2.32.1-24.el8.x86\_64  
libxml2-2.9.7-8.el8.x86\_64 libxslt-1.1.32-5.el8.x86\_64 libzstd-1.4.4-1.el8.x86\_64  
lz4-libs-1.8.3-2.el8.x86\_64 nettle-3.4.1-2.el8.x86\_64 openldap-2.4.46-15.el8.x86\_64  
openssh-8.0p1-5.el8.x86\_64 openssh-clients-8.0p1-5.el8.x86\_64 openssl-1:1.1.1g-11.el8.x86\_64  
openssl-libs-1:1.1.1g-11.el8.x86\_64 pam-1.3.1-11.el8.x86\_64 pcre2-10.32-2.el8.x86\_64  
platform-python-3.6.8-31.el8.x86\_64 platform-python-devel-3.6.8-31.el8.x86\_64 platform-python-pip-9.0.3-18.el8.noarch  
platform-python-setuptools-39.2.0-6.el8.noarch postgresql-10.14-1.module\_el8.2.0+487+53cc39ce.x86\_64 postgresql-server-10.14-1.module\_el8.2.0+487+53cc39ce.x86\_64  
procps-ng-3.3.15-3.el8.x86\_64 python-rpm-macros-3-39.el8.noarch python-srpm-macros-3-39.el8.noarch  
python2-2.7.17-2.module\_el8.3.0+478+7570e00c.x86\_64 python2-libs-2.7.17-2.module\_el8.3.0+478+7570e00c.x86\_64 python2-pip-9.0.3-18.module\_el8.3.0+478+7570e00c.noarch  
python2-pip-wheel-9.0.3-18.module\_el8.3.0+478+7570e00c.noarch python2-setuptools-39.0.1-12.module\_el8.3.0+478+7570e00c.noarch python2-setuptools-wheel-39.0.1-12.module\_el8.3.0+478+7570e00c.noarch  
python3-dnf-4.2.23-4.el8.noarch python3-dnf-plugins-core-4.0.17-5.el8.noarch python3-gpg-1.13.1-3.el8.x86\_64  
python3-hawkey-0.48.0-5.el8.x86\_64 python3-libdnf-0.48.0-5.el8.x86\_64 python3-libs-3.6.8-31.el8.x86\_64  
python3-libselinux-2.9-4.el8\_3.x86\_64 python3-pip-9.0.3-18.el8.noarch python3-pip-wheel-9.0.3-18.el8.noarch  
python3-rpm-4.14.3-4.el8.x86\_64 python3-rpm-macros-3-39.el8.noarch python3-setuptools-39.2.0-6.el8.noarch  
python3-setuptools-wheel-39.2.0-6.el8.noarch python36-3.6.8-2.module\_el8.3.0+562+e162826a.x86\_64 python36-devel-3.6.8-2.module\_el8.3.0+562+e162826a.x86\_64  
rpm-4.14.3-4.el8.x86\_64 rpm-build-libs-4.14.3-4.el8.x86\_64 rpm-libs-4.14.3-4.el8.x86\_64  
rsync-3.1.3-9.el8.x86\_64 sed-4.5-2.el8.x86\_64 setup-2.12.2-6.el8.noarch  
shadow-utils-2:4.6-11.el8.x86\_64 snappy-1.1.8-3.el8.x86\_64 sqlite-libs-3.26.0-11.el8.x86\_64  
subversion-1.10.2-1.module\_el8.3.0+553+567d7cb2.x86\_64 subversion-libs-1.10.2-1.module\_el8.3.0+553+567d7cb2.x86\_64 sudo-1.8.29-6.el8.x86\_64  
systemd-239-41.el8\_3.x86\_64 systemd-libs-239-41.el8\_3.x86\_64 systemd-pam-239-41.el8\_3.x86\_64  
systemd-udev-239-41.el8\_3.x86\_64 tar-2:1.30-5.el8.x86\_64 tzdata-2020d-1.el8.noarch  
utf8proc-2.1.1-4.module\_el8.3.0+553+567d7cb2.x86\_64 util-linux-2.32.1-24.el8.x86\_64 vim-minimal-2:8.0.1763-15.el8.x86\_64  
yum-4.2.23-4.el8.noarch zlib-1.2.11-16.el8\_2.x86\_64

Installed:  
centos-linux-release-8.3-1.2011.el8.noarch centos-linux-repos-8-2.el8.noarch cracklib-dicts-2.9.6-15.el8.x86\_64 crypto-policies-scripts-20200713-1.git51d1222.el8.noarch  
diffutils-3.6-6.el8.x86\_64 elfutils-debuginfod-client-0.180-1.el8.x86\_64 file-5.33-16.el8.x86\_64 gettext-0.19.8.1-17.el8.x86\_64  
gettext-libs-0.19.8.1-17.el8.x86\_64 gnupg2-smime-2.2.20-2.el8.x86\_64 grub2-common-1:2.02-90.el8.noarch grub2-tools-1:2.02-90.el8.x86\_64  
grub2-tools-minimal-1:2.02-90.el8.x86\_64 grubby-8.40-41.el8.x86\_64 hardlink-1:1.3-6.el8.x86\_64 kbd-2.0.4-10.el8.x86\_64  
kbd-legacy-2.0.4-10.el8.noarch kbd-misc-2.0.4-10.el8.noarch kpartx-0.8.4-5.el8.x86\_64 libcroco-0.6.12-4.el8\_2.1.x86\_64  
libevent-2.1.8-5.el8.x86\_64 libgomp-8.3.1-5.1.el8.x86\_64 libmodulemd-2.9.4-2.el8.x86\_64 libsecret-0.18.6-1.el8.x86\_64  
libxkbcommon-0.9.1-1.el8.x86\_64 memstrack-0.1.11-1.el8.x86\_64 openssl-pkcs11-0.4.10-2.el8.x86\_64 os-prober-1.74-6.el8.x86\_64  
pigz-2.4-4.el8.x86\_64 pinentry-1.1.0-2.el8.x86\_64 python3-unbound-1.7.3-14.el8.x86\_64 rpm-plugin-systemd-inhibit-4.14.3-4.el8.x86\_64  
unbound-libs-1.7.3-14.el8.x86\_64 xkeyboard-config-2.28-1.el8.noarch

---

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 6, 2021, 9:02am UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/5 "2021-01-06T09:02:03Z")

</div>

I’ve just found the issue linked below on the AWX git site when I was looking to post a new issue:

[https://github.com/ansible/awx/pull/8775](https://github.com/ansible/awx/pull/8775)

This has the same 2 error’s that I have in my AWX installation output:

- Error: No matching repo to modify: PowerTools
- Failed to set locale, defaulting to C.UTF-8

I’ve asked if there is an ETA on this.

---

<div class="post-metadata">

**Author:** ![Abhinit\_Mallick](https://avatars.discourse-cdn.com/v4/letter/a/ec9cab/32.png) [@Abhinit\_Mallick](https://forum.ansible.com/u/Abhinit_Mallick)\
**Post date:** [January 6, 2021, 1:58pm UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/6 "2021-01-06T13:58:40Z")

</div>

Hi Owain

Greetings for the day

I had awx version 15 installed in my redhat 7.9 system which I have upgraded to awx 16.0.0  
I did upgrade and I did check the awx 15 and awx 16.0.0 github repo from devel branch and I cant find any mentioning of power tools in the build image section of ansible tasks  
Can you please point me to the repo you are referring to and moreover as 16.0.0 is out , do you fancy going directly there.

Regards  
Abhinit Mallick

---

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 6, 2021, 6:07pm UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/7 "2021-01-06T18:07:27Z")

</div>

Hi Abhinit

The install file that references PowerTools is

There is a corrected version in the following git repo that will be committed to the next AWX release here:  
[https://github.com/ansible/awx/blob/devel/installer/roles/image\_build/templates/Dockerfile.j2](https://github.com/ansible/awx/blob/devel/installer/roles/image_build/templates/Dockerfile.j2)

PowerTools has been changed to powertools on lines 27 and 108

I changed this file locally after downloading e.g. /awx-13.0.0/ installer/roles/image\_buil/ templates/Dockerfile.js - replaced PowerTools with powertools - and it installed AWX successfully.

Maybe 16.0.0 was already updated before release?

I can download it and look tomorrow.

---

<div class="post-metadata">

**Author:** ![Owain\_Winterbone](https://avatars.discourse-cdn.com/v4/letter/o/9d8465/32.png) [@Owain\_Winterbone](https://forum.ansible.com/u/Owain_Winterbone)\
**Post date:** [January 7, 2021, 7:20am UTC](https://forum.ansible.com/t/awx-docker-install-on-centos-7-fails-with-failed-to-set-locale-defaulting-to-c-utf-8/34395/8 "2021-01-07T07:20:49Z")

</div>

Hi Abhinit

I just downloaded the AWX 16.0.0 repo and the Dockerfile.j2 already has the correct lower case references to powertools so this should work.  
I think the PowerTools repo name changed to all lower case if fairly recent so it must have been captured in the latest 16.0.0 build but olders one still reference the old name and hence this file needs to be edited for them until newer versions are released that correct this.

Best regards

Owain