# AWX 17 (and now AWX 13)

**URL:** <https://forum.ansible.com/t/awx-17-and-now-awx-13/34743>\
**Category:** AWX Project\
**Tags:** rhel, awx\
**Created:** [March 8, 2021, 7:09pm UTC](https://forum.ansible.com/t/awx-17-and-now-awx-13/34743 "2021-03-08T19:09:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bill\_Biker](https://sea1.discourse-cdn.com/ansible/user_avatar/forum.ansible.com/bill_biker/32/8087_2.png) [@Bill\_Biker](https://forum.ansible.com/u/Bill_Biker)\
**Post date:** [March 8, 2021, 7:09pm UTC](https://forum.ansible.com/t/awx-17-and-now-awx-13/34743/1 "2021-03-08T19:09:21Z")

</div>

Hello All,  
I had a working verions of AWX 13 - I was using port 8000 to access the web site:  
http:my-awx.com:8000. This worked fine. I wanted to upgrade/install AWX 17. I use a virtual machine for the AWX web server. Before I did the upgrade install I took a snapshot of the machine.

It took a while, but finally got AWX 17 installed and the containers show, etc. I am still using port 8000 in the inventory file in the installer directory. I am using RHEL 7.9 with Apache 2.4.

I am unable to connect to the AWX web site using port 8000. the container shows it is pointing to port 8000. What am I missing.

I tried reverting the snapshot to Ver 13 - which used to work, now I cannot access AWX using 8000 either.

Suggestions,  
Thanks  
BB

---

<div class="post-metadata">

**Author:** ![Kurt\_Mitchell](https://avatars.discourse-cdn.com/v4/letter/k/e68b1a/32.png) [@Kurt\_Mitchell](https://forum.ansible.com/u/Kurt_Mitchell)\
**Post date:** [March 8, 2021, 8:11pm UTC](https://forum.ansible.com/t/awx-17-and-now-awx-13/34743/2 "2021-03-08T20:11:55Z")

</div>

Check and make sure the firewall isn’t blocking the port? I ran into an issue where I thought I had checked that, and found that it wasn’t set to be always off. The minute I had rebooted, it turned back on.