# Ansible Tower wont install on CentOS

**URL:** <https://forum.ansible.com/t/ansible-tower-wont-install-on-centos/30614>\
**Category:** Ansible Developer\
**Created:** [June 20, 2019, 1:35pm UTC](https://forum.ansible.com/t/ansible-tower-wont-install-on-centos/30614 "2019-06-20T13:35:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Josh\_Ferguson](https://avatars.discourse-cdn.com/v4/letter/j/54ee81/32.png) [@Josh\_Ferguson](https://forum.ansible.com/u/Josh_Ferguson)\
**Post date:** [June 20, 2019, 1:35pm UTC](https://forum.ansible.com/t/ansible-tower-wont-install-on-centos/30614/1 "2019-06-20T13:35:32Z")

</div>

Hi their,

I am trying to install Ansible Tower onto CentOS 7.6

However after unpacking the “ansible-tower-setup-latest.tar.gz” and trying to run the ./setup.sh , I get the following issue:

-name: ensure that /var /var/tmp and /tmp are not mounted w/noexec

Any help would be appreicated thanks!

---

<div class="post-metadata">

**Author:** ![Tchia04](https://avatars.discourse-cdn.com/v4/letter/t/fbc32d/32.png) [@Tchia04](https://forum.ansible.com/u/Tchia04)\
**Post date:** [June 20, 2019, 9:23pm UTC](https://forum.ansible.com/t/ansible-tower-wont-install-on-centos/30614/2 "2019-06-20T21:23:47Z")

</div>

run the “mount” command verify to see if the mounts point are mounted with noexec  
If it is, then figure out why they are mounted with noexec

---

<div class="post-metadata">

**Author:** ![James\_Tanner](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@James\_Tanner](https://forum.ansible.com/u/James_Tanner)\
**Post date:** [June 20, 2019, 10:36pm UTC](https://forum.ansible.com/t/ansible-tower-wont-install-on-centos/30614/3 "2019-06-20T22:36:50Z")

</div>

If you are a tower customer or are working on a POC, please open a ticket with with support:

[https://access.redhat.com/products/ansible-tower-red-hat#support](https://access.redhat.com/products/ansible-tower-red-hat#support)