# Ansible Tower setup problem.

**URL:** <https://forum.ansible.com/t/ansible-tower-setup-problem/25151>\
**Category:** Ansible Project\
**Created:** [August 1, 2017, 2:53pm UTC](https://forum.ansible.com/t/ansible-tower-setup-problem/25151 "2017-08-01T14:53:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![m.a.kalistratov](https://avatars.discourse-cdn.com/v4/letter/m/ecb155/32.png) [@m.a.kalistratov](https://forum.ansible.com/u/m.a.kalistratov)\
**Post date:** [August 1, 2017, 2:53pm UTC](https://forum.ansible.com/t/ansible-tower-setup-problem/25151/1 "2017-08-01T14:53:18Z")

</div>

Hello.

I need to install Ansible Tower into Debian 3.16.39-1+deb8u2 (also tryed Debian 4.9.30-2+deb9u2), so I ran ./setup.sh, but get the following problem:

./setup.sh: 11: set: Illegal option -o pipefail

```auto
When I try to delete set -o pipefail or change it to set -euf pipefail I get

```

```auto
            ./setup.sh: 151: ./setup.sh: Syntax error: "(" unexpected

```

---

<div class="post-metadata">

**Author:** ![Andrew\_Latham](https://avatars.discourse-cdn.com/v4/letter/a/ed8c4c/32.png) [@Andrew\_Latham](https://forum.ansible.com/u/Andrew_Latham)\
**Post date:** [August 1, 2017, 3:05pm UTC](https://forum.ansible.com/t/ansible-tower-setup-problem/25151/2 "2017-08-01T15:05:15Z")

</div>

For tower questions and support please utilize [https://access.redhat.com/products/ansible-tower-red-hat](https://access.redhat.com/products/ansible-tower-red-hat)

This mailing list is for the open source Ansible project.