# Ansible cisco\_ios. Change Tunnel Interface Only Settings **URL:** \ **Category:** Ansible Project\ **Created:** [July 1, 2021, 1:09pm UTC](https://forum.ansible.com/t/ansible-cisco-ios-change-tunnel-interface-only-settings/35448 "2021-07-01T13:09:51Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![user107](https://avatars.discourse-cdn.com/v4/letter/u/e19adc/32.png) [@user107](https://forum.ansible.com/u/user107)\ **Post date:** [July 1, 2021, 1:09pm UTC](https://forum.ansible.com/t/ansible-cisco-ios-change-tunnel-interface-only-settings/35448/1 "2021-07-01T13:09:51Z")
I collect information about interfaces and after that I need to add the command “no cdp enable” in the tunnels. With the first part, it somehow worked out, but now how to select only the tunnels and add information? tasks: - name: Gather facts (ios) cisco.ios.ios\_facts: gather\_subset: min gather\_network\_resources: - l3\_interfaces - name: Store facts to host\_vars copy: content: “{{ ansible\_network\_resources | dict2items }}” dest: “{{ playbook\_dir }}/backup/{{ inventory\_hostname }}” - name: configure interface settings cisco.ios.ios\_config: lines: - no cdp enable parents: **interface {{ ansible\_network\_resources.l3\_interfaces[‘name’] }}** # what is the format of this string? . . . [{“key”: “l3\_interfaces”, “value”: [{“name”: “Tunnel1”, “ipv4”: [{“address”: “10.111.22.23 255.255.255.224”}]}, {“name”: “Tunnel2”, “ipv4”: [{“address”: “10.111.24.23 255.255.255.224”}]}, {“name”: “FastEthernet0/0”}, {“name”: “FastEthernet0/0.1”, “ipv4”: [{“address”: “10.205.23.2 255.255.255.0”}]}, {“name”: “FastEthernet0/0.2”, “ipv4”: [{“address”: “10.205.254.197 255.255.255.252”}]}, {“name”: “FastEthernet0/0.3”, “ipv4”: [{“address”: “10.111.210.82 255.255.255.252”}]}, {“name”: “FastEthernet0/1”}, {“name”: “FastEthernet0/1.3”, “ipv4”: [{“address”: “10.111.21.82 255.255.255.252”}]}, {“name”: “Serial0/2/0”}, {“name”: “Serial0/2/1”}]}]